Sealcoating in Dallas Fort Worth, TX
Professional asphalt sealcoating with crack filling and surface prep that shields parking lots and driveways from UV damage, water intrusion, and oil stains.
Sealcoating
A Protective Layer Against Texas Sun
Sealcoating protects asphalt from the sun, rain, gasoline, and oil that slowly break down pavement and turn smooth black surfaces gray, brittle, and cracked. North Texas summers bring intense UV that oxidizes asphalt binder quickly, so unprotected lots begin raveling and cracking sooner than many owners expect. Our crews clean the surface, fill cracks, and apply commercial-grade sealer to parking lots, private drives, and residential driveways across Dallas Fort Worth, TX, including Rowlett, Sunnyvale, and Seagoville. A fresh coat restores that deep black finish, makes striping stand out, and adds years to your pavement for a fraction of resurfacing cost. We schedule work in sections and during off hours so tenants, customers, and employees keep access while the sealer cures.
✓ Surface cleaning and blowing
✓ Crack filling before sealing
✓ Commercial-grade sealer application
✓ Sectioned closures for access
✓ Restriping after sealcoat cures
20+ Years Experience
Dallas Fort Worth, TX
Pavement Preservation
Sealcoating That Extends Asphalt Life
A sealcoat only performs as well as the preparation underneath it. Each practice below helps protect your pavement investment.
UV Defense for Oxidizing Asphalt
Months of strong Texas sunlight bake the binder that holds asphalt together, leaving surfaces gray and brittle. Sealer forms a barrier that slows oxidation, keeping pavement flexible so it resists cracking through heat waves and sudden temperature swings.
Cracks Filled Before Sealer Goes Down
Sealing over open cracks hides them for a few weeks while water keeps seeping into the base. We clean and fill cracks first with hot or cold rubberized material, sealing out moisture before the protective coat is applied.
Clean Edges Along Every Border
Sealer splashed onto curbs, garage slabs, and landscaping makes a finished job look careless. Our crews hand cut edges along concrete, walkways, and planting beds so the fresh coating stays where it belongs and the surface looks crisp and professional.
Even Coverage Across Every Section
Thin, streaky applications wear through quickly in high traffic lanes. We apply consistent coats with spray and squeegee methods, adding extra attention to entrances and drive aisles where tires create the most friction and wear.
Closures Planned Around Your Traffic
Sealcoat needs time to cure before vehicles return, so we divide lots into sections and schedule work at night or on weekends when possible. Residents and customers keep parking while each area dries and hardens properly.
Fresh Lines on a Deep Black Surface
New sealer covers old markings, so we restripe as soon as the coating cures. Bright paint against a dark surface improves visibility, guides traffic safely, and gives your property a crisp, well-maintained look for visitors.
What Our Sealcoating Includes
Each step below helps asphalt in Dallas Fort Worth, TX resist sun, water, and fuel spills for years longer.
01
Commercial Parking Lot Sealcoating
Retail centers, offices, churches, and apartment communities receive cleaned, crack-filled, and evenly sealed parking lots, applied in sections so properties stay open and accessible while the protective coating fully cures.
02
Residential Driveway Sealcoating
Homeowners receive careful driveway sealing with edges trimmed neatly along garages, walkways, and landscaping, restoring a rich black finish that protects asphalt from sun damage, rain, and automotive fluid stains.
03
Crack Filling and Routing
Cracks are cleaned, routed where needed, and filled with rubberized material that flexes with temperature changes, keeping water out of the base and slowing the gradual spread of surface damage.
04
Drive Lane and Entrance Sealing
Entrances, drive aisles, and drive-thru lanes receive extra attention where tire friction is heaviest, helping the protective coating hold up longer in the areas that wear out first on busy commercial properties.
05
Surface Preparation and Cleaning
Dirt, debris, vegetation, and loose material are blown, swept, and removed from the pavement before sealing, giving the coating a clean surface for better appearance and longer lasting protection overall.
06
Post-Sealcoat Restriping
Parking stalls, fire lanes, ADA spaces, arrows, and crosswalks are repainted once the sealer cures, restoring clear traffic flow and compliant markings without waiting on a separate striping crew afterward.
Open 24/7
How it works
Our Step-by-Step Sealcoating Process
We start by walking your pavement to measure square footage, note cracks and worn areas, and plan sections around your traffic patterns. After you approve the estimate and schedule, our crew cleans the surface, fills cracks, and applies the sealer evenly. Barricades stay in place while the coating cures, then we restripe markings and reopen each section to vehicles.
Sealcoating works best as part of a regular pavement care plan. Before sealing, our team can complete concrete and asphalt repairs for potholes and failed patches, and afterward fresh parking lot striping restores clear, compliant markings. Periodic power washing removes grime from sidewalks and curbs, keeping the entire property clean. With 20+ years of experience protecting DFW pavement, we keep lots looking their best. Call 999 STRIPING & POWER WASHING, LLC. to put your lot on our sealcoating schedule.
Common questions
Frequently Asked Questions
How often should a commercial parking lot be sealcoated?
Most lots benefit from sealcoating every two to three years, depending on traffic volume, sun exposure, and wear. High traffic retail centers and drive-thru lanes may need attention sooner, while lightly used areas can wait longer between coats.
Can new asphalt be sealcoated right away?
New asphalt needs time to cure before sealing, usually several months, so oils can escape and the surface can harden. Sealing too early can trap those oils and weaken the bond between the coating and pavement.
Will sealcoating fix cracks and potholes?
No. Sealer protects pavement but does not repair structural damage. Cracks should be filled and potholes patched before sealing, otherwise water continues entering the base through open cracks and the damage quietly spreads beneath the new coating.
What weather conditions are needed for sealcoating?
Sealer needs dry pavement, no rain in the immediate forecast, and moderate to warm temperatures to cure properly. North Texas weather allows sealcoating much of the year, though we watch storm forecasts closely before scheduling work.
Is sealcoating worth it for an older driveway?
If the driveway is structurally sound with minor cracks and fading, sealcoating can noticeably extend its life and improve appearance. Driveways with widespread crumbling, deep potholes, or sunken areas usually need repairs or replacement first.
Does sealcoating make asphalt slippery?
Fresh sealcoat can feel smoother than worn pavement, so fine sand is often blended into the mix for traction. Sand-blended sealer improves grip for vehicles and pedestrians while still protecting asphalt from sun, water, and fuel spills.
